Incinerators for mixed waste

Nominal burning rate shall be 100 -140 kg/hr with 8 hour daily operating cycle of ash removal, pre-heat and burn with continuous loading.
Primary power source shall be electricity but capable of using diesel fuel as a supplemental fuel.
The waste incinerators shall be designed for 3 Phase, 380-400 V, 50 Hz electricity supply.
Should have dual combustion chambers with gas temperature achieve 1000 C for retention time at least 2 second,
Have a thermal efficiency of not less than 85%.
All metal surfaces (except combustion chamber internal fittings) shall be either galvanized, enameled, painted or 
otherwise treated against atmospheric and process induced corrosion.
The incinerator combustion chambers should be designed for easy maintenance of all internal parts including the 
refractory and insulation. Materials used in the individual parts of the incinerator shall be heat resistance and also 
be protected against oxidation, corrosion, etc.
Primary and secondary chambers preferably have rounded inside corners to avoid the formation of dead zone or cold pockets.
Generate residual incinerator ash conforming to <10% by volume and <25% by weight of the waste incinerated.
Achieve a Total Organic Carbon (TOC) content in the slag and bottom ashes of less than 3%. Combustion Efficiency (CE) at least 99%.

Could not authenticate you.