Author: cloverincinerator

Basic Info. Export Markets:Global Additional Info. Trademark:CLOVER Product Description Nanjing Clover Medical Technology Co., Ltd.. Clover Medical supply medical incinerator, ability from 10kgs per hour to 500kgs per hour. China clover medical, china companies incinerator, china cremation incinerator, china crematorium manufacturers, china disagreements over health effects from waste incineration,  Items/Model YD-10C YD-20C YD-30C YD-50C Burning […]
Phone: +86-13813931455(whatsapp/wechat)Website: http://www.hiclover.com/  Email: sales@hiclover.comEmail: hicloversales@gmail.com   Nanjing Clover Medical Technology Co.,Ltd.
Basic Info. Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:clover Product Description The TS PLC model incinerator come rather than SYC model now. SYC model incinerator included model SYC-10/20/30/50/100 and now these model stop supply for market. We supply updated TS PLC models, more work, PLC controller, stainless steel chimney and reasonable […]
Items/Model TS75 Picture   Principle Solid Waste Incineration  Burn Rate Average 75 kg/hour Feed Capacity Average 100kg Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 600L Internal Dimensions 100x60x100cm Secondary Chamber 300L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 3.0Kw Oil Consumption (L/Hour) 15-20 Natural Gas Consumption (m3n/hour) ** Temperature Monitor Digital Display Temperature […]
Common, well-proven and clean technology – both as a complete unit and in terms of its individual components. Robust and sturdy for installation in remote locations. As labor free as possible, easy to use and operated by trained but mostly unskilled operators. Require minimal pre-processing, limited need for prior sorting, crushing or shredding.Capable of handling mixed solid waste streams (non-recyclable waste with some mix of organic waste, garden waste, burnable materials such as waste wood and clothing). It can accommodate large variations in waste composition and calorific value.Operated on a daytime shift basis, five (5) days per week. Have very low unburned materials in the slag.Economical to operate and maintain and have a low and efficient fuel consumption. Have an operation manual in English.Catalogues/brochures are required. Detail Specifications for Waste Incinerators:The equipment should have a minimum life time operation often (10) years in a tropical environment.Average loading capacity of 1,000 kg/day with maximum loading capacity of 1,200 kg.
Basic Info. Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:clover Product Description Application Scope:  1. Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC) Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour Feed Capacity 20kg 40kg 60kg 100kg 200 kg Control Mode PLC PLC PLC PLC PLC Combustion Chamber 100L 210L […]
50kgs per hour incinerator with two chambers suppliers from china *Aveage 50kgs per hour *Double chamber and double burner *900liters primary combustion chamber *Italy burner *Stainless steel chimney Model YD-50  Burning Rate Average 50 kgs/hour Feed Capacity Average 150 kgs Primary Combustion Chamber 900 Liters Secondary Combustion Chamber 300 Liters Mix Combustion Chamber Yes Smoke […]
Basic Info. Model NO.:medical waste incinerator 20 kg/ manufacturers Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Product Description Key Features:  * All models with Dual combustion chamber. *according to order  * Stainless Steel chimney/stack, long lifetime. *according to order  * High temperature, long lifetime of incinerator.  * Free or minimum installation on site.  * […]
Basic Info. Model NO.:medical waste incinerator Export Markets:Global Product Description Nanjing Clover Medical Technology Co., Ltd. is a leading waste incinerator Maker in China. Key Features:  * All versions with Dual combustion chamber.  * Stainless Steel chimney/stack, long lifetime. *according to order  * High fever, long lifetime of incinerator.  * Free or minimum installation on […]
*** Primary combustion chamber & secondary combustion chamber *** Smoke filter chamber(dry scrubber) *** stainless steel chimney *** PLC auto. control *** Italy made oil or gas burner(diesel oil/natural gas/lpg) *** temperature display and control *** high temperature firebrick,etc
Product Description Model YD-500  Burning Rate  500 kgs/hour Feed Capacity 800 kgs Primary Combustion Chamber 4000 Liters Secondary Combustion Chamber 1500 Liters Mix Combustion Chamber Yes Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V/380V Power 2.24Kw Fuel Type Diesel Oil/ Natural Gas/LPG Burner Italy Original Oil Consumption (Diesel Oil) 31–59.1 kg/hour Gas Consumption (Natural […]
a. be based on common, well-proven and clean technology – both as a complete unit and in terms of its individual components.  b. be very robust, sturdy and capable of installation in remote locations subject to severe conditions.  solid waste incinerator for medical waste disposal china incinerators Principle Medical Waste Incineration Treatment Burn Rate Average 1000-1500 kg/hour Feed Capacity Average 6000kg/feeding Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 4800Liter  Internal Dimensions 400*120*100 cm d. generate residual incinerator ash conforming to <10% by volume and <25% by weight of the waste incinerated.  “• Heavy steel construction.The proposed incinerators shall be able to be completely packed into a series of 20ft export standard sea containers. • Fixed hearth geometry and starved air gasification operational mode.  • Hot face refractory concrete-ceramic suitable for thermal shock up to 1400 Celsius and abrasion. Minimum thickness 150mm.  • Cold face refractory lining of calcium silicate or superior material, minimum thickness 100mm.  • Refractory lining of all the ducts shall be done with refractory castings. Superior quality ceramic wool shall be used at all hot duct flanges and expansion joints. m. incorporate an Air Pollution Control System suitable for basic emission control  n. have a thermal efficiency of not less than 85%.  o. primary and secondary chambers shall preferably have rounded inside corners to avoid the formation of dead zones or cold pockets p. have very low levels of unburned material in the slag q. include a supplement fuel source and storage unit (e.g., diesel tank),  “r.  proposals shall include the fuel consumption at the rated capacity be CE Certified, meet relevant British, EU or American Standards, or equivalent. and cool down cycle will take place overnight. • The incinerators shall be capable of using diesel fuel as a supplemental fuel while the associated management equipment shall be capable of using electricity as the primary power source.                 Nanjing Clover Medical Technology Co.,Ltd. Ecolead Technology(Nanjing) Co.,Ltd. Mobile: +86-13813931455(WhatsApp) Website: www.hiclover.com  Email:     sales@hiclover.com  Email:     hicloversales@gmail.com       […]
Incinerator Model A1500, Overview This model is big-scale animal cremation equipment for big animals.  Construction is dual/double combustion chamber with 03 units oil/gas burner,  batch load incineration equipment. Animal feed chamber is 1500Liters (Model: A1500).  Primary & Secondary combustion chambers and included mix-combustion chamber,  smoke filter chamber with firebrick and Refractory Concrete chamber. Batch load […]
Basic Info. Model NO.:pyrolytic incinerator Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Product Description Key Attributes:  * All versions with Dual combustion chamber.  * Stainless Steel chimney/stack, long life. *based on order  * High temperature, long life of incinerator.  * Free or minimal installation onsite.  * High speed, from 10kgs to 500kgs per hour, […]
Incineration is the only method providing complete destruction and neutralization of  the medical waste ideally at the source. For developing country and regions, we support  cheap cost budget customer to purchase the small scale incinerator, with basic function,  burning rate 10kgs to 50kgs per hour capacity, single combustion chamber and  three combustion chambers incinerator. It’s […]
Basic Info. Model NO.:A1200 Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:North America Additional Info. Trademark:clover Product Description A Model creature crematory is latest layout for animal cremation and other solid waste. This gear quality structural for types of site, like hospital, environmental division, animal cremation phuket medical waste incinerator, pics of pet crematorium, pictures […]
Basic Info. Model NO.:the price of animal crematory Export Markets:Global Product Description Nanjing Clover Medical Technology Co., Ltd. Is a leading waste incinerator manufacturer in China. We are local manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is main waste treatment all of the world, for Medical Waste, Animal Incineration, […]
This model is small-scale animal cremation equipment for small pets and animals.  Construction is dual/double combustion chamber with 02 units oil/gas burner,  batch load incineration equipment. Animal feed chamber is 360Liters (Model: A360).  Primary & Secondary combustion chambers and included mix-combustion chamber,  smoke filter chamber with firebrick and Refractory Concrete chamber(as quotation detail).  Batch load […]
Product Description The mill workshop neighborhood in liuhe Economic Development Zone, suburb of Nanjing and company office neighborhood in downtown area. Presently, incinerator line goods marketplace cover former Soviet Union area, Africa states, Asia states and Middle East area.  From year 2010, we negotiated with upgraded technologies from Europe and America manufacturers and establish alliance […]
HICLOVER Fighting COVID-19 CE ISO
HICLOVER Hot Blogs
Recent Posts