Equipment
An Incinerator is to be
supplied by the Contractor on a rental basis at a location established
by the Company. The Contractor is to provide trained and competent
personnel with initial installation, commissioning and operational
training under the supervision of the manufacturer’s technician. The
incinerator is to be maintained and operated to manufacturer’s
specifications by trained personnel. Contractor must have sufficient
personnel trained and competent to operate the incinerator throughout
the contract period. Specifications for the incinerator are attached in
Appendix A.
Incinerator Use/Ash Collection
Incinerators used will be
limited to daylight hours of operation. This includes shutdown, cleaning
and maintenance.
Waste streams shall not be
mixed during the incineration process and the ash collection chamber
will be cleaned when a different waste stream is to be incinerated. The
Company will provide the contractor with a list of items that can be
incinerated.
All ash will be collected
and stored in individual storage bins for each particular waste stream.
The bins are to be provided by the contractor to the same design as the
storage bins for the raw waste streams and include a lid design that
prevents contamination from water.
Ash from each waste stream
will be sent for laboratory analysis after each initial incineration by
the Company and at intervals decided by the Company thereafter.
Contractor will be required to collect ash samples for analysis as
directed by the Company. The Contractor will be responsible for the
security of samples taken to prevent contamination until collection by
the Company or designated courier.
Ash will be disposed of at
the direction of the Company. It is the responsibility of the Contractor
to ensure the ash is not compromised until final disposal. Company will
provide additional storage area for ash if and as required.
Delivery Schedule
The
delivery schedule for the unit with capacity 100 kg/h requested is no
greater than 10 weeks and 14 weeks for the unit with capacity 150 kg/h.
These timelines include unit mobilization. Location ,Erbil ,IRAQ.
APPENDIX A
WASTE INCINERATORS
RECOMMENDATIONS
Capability
·
Incinerate
minimum 80kg/hr X 12 hrs per day
·
Disposal of
both non-hazardous and hazardous waste streams (per waste inventory)
·
Mobile Unit
(Skid mounted preference with lifting points)
Design/Specifications
·
Incinerators
must have a secondary combustion chamber with a minimum temperature
range of 900c
·
Liquid waste
streams shall be incinerated by an appropriate liquid injection system
·
The
incinerators will be installed with visual alarms to alert operations of
low temperature in the secondary chamber
Operating
Environment and Ambient Conditions
The Incinerators
package shall be designed to operate under the following conditions:
·
Average
Daily Max/Min June Temperature, 21-39°C
·
Average
Daily Max/Min January Temperature, 2-12°C
