Items/Model CA100 Picture Principle Medical Waste Incineration Treatment Burn Rate Average 100 kg/hour Feed Capacity Average 200kg/feeding Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 1200L Internal Dimensions 120x100x100cm Secondary Chamber 600L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 1.3 Kw Oil Consumption (kg/hour) Average 20.4 Kgs/Hour Gas Consumption (m3/hour) *** Temperature […]
Common, well-proven and clean technology – both as a complete unit and in terms of its individual components. Robust and sturdy for installation in remote locations. As labor free as possible, easy to use and operated by trained but mostly unskilled operators. Require minimal pre-processing, limited need for prior sorting, crushing or shredding.Capable of handling mixed solid waste streams (non-recyclable waste with some mix of organic waste, garden waste, burnable materials such as waste wood and clothing). It can accommodate large variations in waste composition and calorific value.Operated on a daytime shift basis, five (5) days per week. Have very low unburned materials in the slag.Economical to operate and maintain and have a low and efficient fuel consumption. Have an operation manual in English.Catalogues/brochures are required. Detail Specifications for Waste Incinerators:The equipment should have a minimum life time operation often (10) years in a tropical environment.Average loading capacity of 1,000 kg/day with maximum loading capacity of 1,200 kg.
a. be based on common, well-proven and clean technology – both as a complete unit and in terms of its individual components. b. be very robust, sturdy and capable of installation in remote locations subject to severe conditions. solid waste incinerator for medical waste disposal china incinerators Principle Medical Waste Incineration Treatment Burn Rate Average 1000-1500 kg/hour Feed Capacity Average 6000kg/feeding Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 4800Liter Internal Dimensions 400*120*100 cm d. generate residual incinerator ash conforming to <10% by volume and <25% by weight of the waste incinerated. “• Heavy steel construction.The proposed incinerators shall be able to be completely packed into a series of 20ft export standard sea containers. • Fixed hearth geometry and starved air gasification operational mode. • Hot face refractory concrete-ceramic suitable for thermal shock up to 1400 Celsius and abrasion. Minimum thickness 150mm. • Cold face refractory lining of calcium silicate or superior material, minimum thickness 100mm. • Refractory lining of all the ducts shall be done with refractory castings. Superior quality ceramic wool shall be used at all hot duct flanges and expansion joints. m. incorporate an Air Pollution Control System suitable for basic emission control n. have a thermal efficiency of not less than 85%. o. primary and secondary chambers shall preferably have rounded inside corners to avoid the formation of dead zones or cold pockets p. have very low levels of unburned material in the slag q. include a supplement fuel source and storage unit (e.g., diesel tank), “r. proposals shall include the fuel consumption at the rated capacity be CE Certified, meet relevant British, EU or American Standards, or equivalent. and cool down cycle will take place overnight. • The incinerators shall be capable of using diesel fuel as a supplemental fuel while the associated management equipment shall be capable of using electricity as the primary power source. Nanjing Clover Medical Technology Co.,Ltd. Ecolead Technology(Nanjing) Co.,Ltd. Mobile: +86-13813931455(WhatsApp) Website: www.hiclover.com Email: sales@hiclover.com Email: hicloversales@gmail.com […]
Product Description Principle of This Incinerator equipment is incineration/combustion/burn. Items/Model TS100(PLC) Burn Rate 100 kg/hour Feed Capacity 200 kg Control Mode PLC Combustion Chamber 1200L Internal Dimensions 120x100x100cm Secondary Chamber 600L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 0.7Kw Oil Consumption (kg/hour) 14–28 Gas Consumption (m3/hour) 10–32.2 Temperature Monitor Yes Temperature Protection […]
Basic Info. Model NO.:waste incineration furnace Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Product Description Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC) Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour Feed Capacity 20kg 40kg 60kg 100kg 200 kg Control Mode PLC PLC PLC PLC PLC Combustion Chamber 100L 210L 330L 560L […]
HICLOVER Top Feeding Door Waste Incinerators ▲▲▲Large Feeding Door ▲▲▲Better for Animal Waste Cremation ▲▲▲HICLOVER Brand Section ***Primary Combustion Chamber ***Secondary Combustion Chamber ***Smoke Filter Chamber ***Optional Wet Scrubber System(1 section or 3 sections) Phone: +86-13813931455(whatsapp/wechat)Website: http://www.hiclover.com/ Email: sales@hiclover.comEmail: hicloversales@gmail.com Nanjing Clover Medical Technology Co.,Ltd. Items Side Loading Door Top Loading Door Cost Cheap High cost Manufacture Tech. Easy A litter difficult […]
Specifically designed for red bag Medical wastes with high density and high moisture content.Each chamber should have at least one temperature sensorOne temperature sensor mounting point at the base of the exit flue ensuring that chamber reaches the necessary 800°C minimum. Minimum 50-100% moisture Items/Model TS100(PLC) Principle Waste Incineration Waste Treatment Animal Waste Incineration Treatment Burn Rate Average 200 kg/hour Feed Capacity Average 1000kg Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 1200L Internal Dimensions 120x100x100cm Secondary Chamber 600L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 0.7Kw Oil Consumption (kg/hour) 17–36 Gas Consumption (m3/hour) […]
Modified burn barrels could be built using commonly available substances. They could either be pre-built independently or hauled to the site for meeting. Detailed construction programs are given in Appendix 2. Although modified burn barrels are designed to make an edge over open burning off the ground, burn boxes and unmodified burn barrels through reaching […]
incinerator manufacturer,medical incinerator,small scale incinerator,oil fired incinerator Items/Model TS100 Burn Rate Average 100 kg/hour Feed Capacity Average 200 kg/feed Control Mode PLC Combustion Chamber 1200L Internal Dimensions 120x100x100cm Secondary Chamber 600L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 0.7Kw Oil Consumption (kg/hour) 14–28 Gas Consumption (m3/hour) 10–32.2 Temperature Monitor Yes Temperature Protection […]
Basic Info. Export Markets:Global Additional Info. Trademark:nanjing clover Origin:Nanjing Cn Product Description Nanjing Clover Medical Technology Co., Ltd.. Key Features: * All versions with Dual combustion room. * Stainless Steel chimney/stack, long life. *based on order * High fever, long life of incinerator. * Free or minimum installation onsite. * High burn rate, from 10kgs […]
Basic Info. Model NO.:small waste incinerator manufacturers Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Product Description Items/Model YD-10C YD-20C YD-30C YD-50C Burning Rate (kgs/Hour) 10 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 50 kgs/Hr. Feed Capacity (kgs) 40 kgs 40 kgs 50 kgs 80 kgs Equipment Weight 1200 kgs 1200 kgs 1800 kgs 2200 kgs Picture […]
HICLOVER is growing brand for environmental protection field, and market share with most of Africa, Middle East, Southeast Asia countries and part of North America, Europe territory. We are trusted partner for governmental organizations, non-profit organizations, international contractors, logistics organizations, military, pet cremation business owners, etc. We have export experience more than 40 countries, including […]
1. Diesel primary & secondary burners with frequency of 50-60hz able to attain 8500-1200 C. 2. Blower motor/ventilation fan of 40-60 W, 110-230 V, 50 hz 3. Refractory layer per square meter. 4. Incinerator chimney segments. 5. Incinerator door gasket 6. Secondary & primary chamber thermocouples capable of measuring 12000C 7. 500 litres steel fuel tank. […]
Basic Info. Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:CLOVER Origin:Nanjing Clover Production Capacity:1000 Sets Per Year Product Description 9. Nanjing Clover Medical Technology Co., Ltd.. Is a leading waste incinerator manufacturer in China. We’re local producer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is primary waste […]
Basic Info. Model NO.:medical waste incinerator 20 kg/ manufacturers Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Product Description Key Features: * All models with Dual combustion chamber. *according to order * Stainless Steel chimney/stack, long lifetime. *according to order * High temperature, long lifetime of incinerator. * Free or minimum installation on site. * […]
Basic Info. Export Markets:Global Product Description Key Attributes: * All models with Dual combustion room. * Stainless Steel chimney/stack, long lifetime. *based on order * High temperature, long lifetime of incinerator. * Free or minimal installation on site. * High speed, from 10kgs to 500kgs per hour, up to 6ton per day. * PLC Control […]
Phone: +86-13813931455(whatsapp/wechat)Website: http://www.hiclover.com/ Email: sales@hiclover.comEmail: hicloversales@gmail.com Nanjing Clover Medical Technology Co.,Ltd.
Made-in-Vietnam waste incinerator reveals its ability VietNamNet Bridge – The waste incinerator of Deadly inventor Trinh Dinh Nang has been utilized at Bac Kan, Tuyen Quang and Thanh Hoa. But if it’s used in different provinces as well, and so, can be produced on a large scale, the manufacturing costs will be a lot lower. […]
Product Description Nanjing Clover Medical Technology Co., Ltd.. Items Specification YDC Model YD-10C / YD-20C / YD-30C / YD-50C Main Product List Primary Combustion Chamber Secondary Combustion Chamber Mix Combustion Chamber Smoke Filter Chamber Incinerator Common Control Case Stainless Steel Chimney Italy oil/gas burner: 02 units Oil Tank (if oil fuel) YDC incinerator is latest […]
Basic Info. Model NO.:incinerator for medicial waste Export Markets:Global Product Description Items/Model YD-10C YD-20C YD-30C YD-50C Burning Rate (kgs/Hour) 10 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 50 kgs/Hr. Feed Capacity (kgs) 40 kgs 40 kgs 50 kgs 80 kgs Equipment Weight 1200 kgs 1200 kgs 1800 kgs 2200 kgs Picture Primary Chamber (Liters) 200 200 […]
HICLOVER Fighting COVID-19 CE ISO
