Waste Incineration Treatment Diesel Oil type Model TS150 Main Parts List as below: Primary combustion chamber Secondary combustion chamber smoke filter chamber incinerator PLC control case chimney, 10meters, stainless steel Italy Oil fule burner oil tank 300liters with full spare parts: oil burner, air blower, temperature thermocouple
This model is small-scale waste incineration equipment for small waste output. Construction is dual/double combustion chamber with 02 units oil burner, batch load incineration equipment. Waste feed chamber is 2000Liters (2.0m3, TS300 PLC). Primary & Secondary combustion chambers and smoke filter chamber. Batch load on the bottom of chamber. Incinerator PLC panel control suit for […]
Question: Brick and refractories to withstand 1700°C (3092°F) Our std. high density castable refractory material is rated for 3000°F (1649°C). There is 3100°F material available but is considerably more expensive and labour intensive to work with. The point is why? The incinerator will never exceed 2200°F (actually 2000°F), so what is the value? TRHA Response: […]
Nanjing Clover Medical Technology Co., Ltd. is a leading waste incinerator manufacturer in China. We are local manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is main waste treatment all of the world, for Medical waste, Pet animal cremation and other Solid waste. The capacity from 10kgs/Hr. to 500kgs/Hr., up […]
Chairman of the South West Regional Health Authority (SWRHA) Dr Lackram Bodoe said a back-up of medical waste at the San Fernando General Hospital had to do with a delay in payment to a contractor Rather than the malfunctioning of This incinerator. Responding to complaints about the risks posed by the gathered medical waste, which […]
Model YD-150 Burning Rate Average 150 kgs/hour Feed Capacity Average 300 kgs/feeding Primary Combustion Chamber 1500 Liters Secondary Combustion Chamber 500 Liters Mix Combustion Chamber Yes Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V/380V Power 1.03Kw Fuel Type Diesel Oil/ Natural Gas/LPG Burner Italy Original Oil Consumption (Diesel Oil) 17–36 kg/hour Gas Consumption (Natural […]
Basic Info. Model NO.:waste incinerators equipment manufacturers Export Markets:Global Product Description Key Features: * All models with Dual combustion chamber. * Stainless Steel chimney/stack, long life. *based on order * High fever, long life of incinerator. * Free or minimal installation onsite. * High speed, from 10kgs to 500kgs per hour, up to 6ton daily. […]
Model TS10 Incinerator with wet scrubber (Spray Tower) and Defogging Tower Incinerator Items/Model HICLOVER TS10(PLC) Burn Rate (Average) 10-20 kg/hour Feed Capacity(Average) 20kg/feeding Control Mode PLC Automatic Primary Combustion Chamber 100L Internal Dimensions 50x50x40cm Secondary Chamber 50L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 3.0Kw Burner Type Italy Brand Oil […]
Phone: +86-13813931455(whatsapp/wechat)Website: http://www.hiclover.com/ Email: sales@hiclover.comEmail: hicloversales@gmail.com Nanjing Clover Medical Technology Co.,Ltd. HICLOVER Incinerator/Parts Range Main Feature Medical Waste Incinerators HICLOVER 10-500kgs/Hr.Double Combustion Chambers Single Combustion Chamber Small, Cheap,10-20kgs/Hr. Three Combustion Chambers(Optional) 3 Chambers for high risk waste Pet Cremation Equipment For Pet(small/big) Cremation Business Animal Incineration Equipment For other animal incineration Items/Model TS100(PLC) TS150(PLC) TS300(PLC) TS500(PLC) Burn Rate (Average) 100 kg/hour 150 kg/hour 300 kg/hour 500 kg/hour Control Mode PLC Auto. PLC Auto. […]
Clover supply optional dust wet scrubber system for waste incinerators. the main parts included wet cooling spray scrubber, wet dust filter and fog&waste separator. This system is valid for mid-large scale waste incinerator, model YD150,YD200,YD300,YD500,YD600. for small scale waste incinerator, supply dry scrubber(filter) chamber.
Medical Waste Incinerator Manual load twin chamber incinerator for medical waste to burn 50kg/hr on continuous operation, with Primary temperature in the region of 800degC minimal and 1200degC or longer at the Secondary chamber, complete with charging doorway, Ash doorway, Air and view vents, auxiliary air system with adjustable dampers, burners and burner control system […]
Basic Info. Model NO.:medical waste incinerator Export Markets:Global Product Description Nanjing Clover Medical Technology Co., Ltd. is a leading waste incinerator Maker in China. Key Features: * All versions with Dual combustion chamber. * Stainless Steel chimney/stack, long lifetime. *according to order * High fever, long lifetime of incinerator. * Free or minimum installation on […]
Small Waste Incinerator, 10kgs per hour capacity, PLC control
Product Description Incinerator is a incineration equipment, direct fire waste by gasoline fuel or oi fuel. As distinct circumscription, incinerator could be termed many words as below: Treatment ability: Small scale incinerator, big scale incinerator and incineration pant. Waste substance: Municipal waste incinerator, medical waste created in ghana, medical waste in azerbaijan, medical waste in […]
Dual heat burners and dual chamber incinerator Burning capacity up to 30 Kg per hour Main Product List Primary Combustion Chamber(Main body stainless steel) Secondary Combustion Chamber(Main body stainless steel) Mix-Combustion Chamber Wet Scrubber( Washing Tower)(Main body stainless steel) Incinerator Control Case Chimney:5.0Meters Stainless Steel Italy gas burner: 02 sets Oil Tank (if oil fuel): […]
Basic Info. Export Markets:Global Product Description Key Attributes: * All models with Dual combustion chamber. * Stainless Steel chimney/stack, long life. *based on order * High temperature, long life of incinerator. * Free or minimum installation onsite. * High speed, from 10kgs to 500kgs per hour, up to 6ton daily. *based on order New Design […]
PLC( Programmable Logic Controller), Intelligent and Automatic operation. Set combuston time according to different waste material and incinerator stop combustion itself. Set temperature protection parameter, if the temperature overheat, incinerator stop combustion itself.
75 Kg/hour waste materials of biological Items/Model TS75(PLC) Principle Waste Incineration Waste Treatment Medical Waste Incineration Treatment Burn Rate Average 75 kg/hour Feed Capacity Average 100kg Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 560L Internal Dimensions 100x80x70cm Secondary Chamber 280L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 0.7Kw Oil Consumption (kg/hour) […]
Ecolead Technology(Nanjing) Co.,Ltd. (ECOLEAD), supply system solutions for air filters and medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project, clean room products, auto roll filters. Nanjing Clover Medical Technology Co.,Ltd. (HICLOVER) is our sister company focus on export business. Items/Model TS75(PLC) Principle Waste Incineration Treatment Burn Rate Average […]
HICLOVER Fighting COVID-19 CE ISO
