Emerging Opportunities in Uganda’s Medical and Industrial Waste Incineration Market In recent months, there has been growing interest in expanding waste incineration capacity in Uganda, especially for medical, industrial, and municipal waste. As demand for efficient and reliable waste disposal solutions increases, new procurement projects have started to appear in the local market—signaling potential opportunities […]
Pre-assembled, containerized type Burning rate: 100 – 120kg / hour medical waste incinerator Minimum operating temperature: 8500c (Primary combustion) Maximum operating temperature: 14500c (afterburner chamber) Secondary Burning capacity: Compulsory. Density insulation: 20 mm high hospital waste incinerators Refractory casting: minimum 65mm Heavy duty refracting lining to withstand 15000c Average burn out time: maximum 3.0 hrs Fuel […]
In an attempt to make a partial relief from the mounting waste disposal difficulties, a new incinerator will start functioning at the Kozhikode Medical College soon. The incinerator was installed with the fund from the Hospital Development Society (HDS). HDS member Saleem Madavoor advised’City Express’ that the society has allotted’15 lakh towards the costs which […]
Basic Info. Model NO.:livestock incinerators Export Markets:Global Product Description Nanjing Clover Medical Technology Co., Ltd. Nanjing Clover Medical Technology Co., Ltd. is a leading waste incinerator manufacturer in China. Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC) Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour Feed Capacity 20kg 40kg 60kg 100kg 200 kg […]
Items/Model TS50A (PLC) Principle Waste Incineration Waste Treatment Medical Waste Incineration Treatment Burn Rate Average 50A kg/hour Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 700L Internal Dimensions 110x80x80cm Secondary Chamber 500L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V 50Hz Power 0.77Kw Oil Consumption (kg/hour) 12.1–23.9 Gas Consumption (m3/hour) 9.9–26.1 Temperature Monitor Digital […]
Incinerator Model TS55 PLC, Overview This model is small-scale waste incineration equipment for small waste output. Construction is dual/double combustion chamber with 02 sets oil/gas burner, batch load incineration equipment. Waste feed chamber is 400Liters (0.40m3, TS55 PLC). Primary & Secondary combustion chambers and smoke filter chamber. Batch load on the bottom of chamber. Incinerator […]
WAMBA, Kenya, June 30 (Thomson Reuters Foundation) – Poor weather, security threats and bad roads have made disposing of the Wamba district hospital’s medical waste a challenge. The nearest incinerator is about 200 kilometres (125 miles) off and “travelling was not possible during heavy rains since linking roads were cut off by floods,” said Stephen […]
Basic Info. Model NO.:YD-30C Export Markets:Global Additional Info. Trademark:CLOVER Product Description We, Clover Medical Limited, Located in China mainland. Items/Model YD-10C YD-20C YD-30C YD-50C Burning Rate (kgs/Hour) 10 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 50 kgs/Hr. Feed Capacity (kgs) 40 kgs 40 kgs 50 kgs 80 kgs Equipment Weight 1200 kgs 1200 kgs 1800 kgs 2200 […]
Basic Info. Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:clover Origin:Nanjing Clover Product Description Key Features: * All versions with Dual combustion chamber. *based on sequence * High fever, long lifetime of incinerator. * Free or minimal installation onsite. * High burn rate, from 10kgs to 500kgs per hour, up to 6ton […]
Basic Info. Model NO.:incineration hazardous waste management in italy Export Markets:Global Product Description Key Features: * All versions with Dual combustion chamber. * Stainless Steel chimney/stack, long lifetime. *based on order * High temperature, long lifetime of incinerator. * Free or minimum installation on site. * High speed, from 10kgs to 500kgs per hour, up […]
Model WS-35 Picture Burning Rate Average 35 kgs/hour Feed Capacity Average 80 kgs Primary Combustion Chamber 460 Liters Secondary Combustion Chamber 200 Liters Third Combustion Chamber 200 Liters Smoke Filter Chamber Wet Scrubber System Feed Mode Manual Voltage 220V Power 2Kw Fuel Type Natural Gas/LPG Burner Italy Original Oil Consumption (Diesel Oil) *** Gas Consumption […]
Basic Info. Model NO.:medical waste incinerator manufacturers Export Markets:Global Product Description Key Attributes: * All models with Dual combustion chamber. * Stainless Steel chimney/stack, long life. *according to order * High temperature, long life of incinerator. * Free or minimal installation on site. * High burn rate, from 10kgs to 500kgs per hour, up to […]
Containerized Medical Waste Incinerators This model is small-scale waste incineration equipment for small waste output. Construction is dual/double combustion chamber with 02 units oil burner, batch load incineration equipment. Waste feed chamber is 1200Liters (1.2m3, CA100 ). Primary & Secondary combustion chambers and smoke filter chamber. Batch load on the bottom of chamber. Incinerator PLC […]
Waste Incinerator Capacity average 30-50 kgs per hour Model YD-30C Main Product List Primary Combustion Chamber Secondary Combustion Chamber Mix-Combustion Chamber Smoke Filter Chamber Incinerator Control Case (PLC Auto Type) Chimney:5.0Meters *(upgrade to Stainless Steel, free cost) Italy oil burner: 02 sets Oil Tank: 200Liters […]
Model CA100 Waste Treatment Waste Incineration Treatment Feed Capacity Average 100 kgs per feed Burning Rate Average 100 kgs per hour Burning Time per Feed Average 1 hour Control Mode PLC(Programmable Logic Controller Incinerator) Voltage 220V Power 0.7Kw Fuel Diesel oil Burner Italy Burner Feed Mode Manual Temperature Monitor Digital Display Fuel consumption (Oil) Average […]
Medical Waste Incineration Market in Nigeria Nigeria, the largest economy in Africa with over 220 million people, has a rapidly expanding healthcare system comprising: Over 30 federal teaching hospitals Hundreds of state and specialist hospitals Thousands of private clinics and diagnostic centers The volume of infectious medical waste—such as sharps, pathological waste, and contaminated materials—has […]
Basic Info. Export Markets:Global Additional Info. Trademark:clover Product Description Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC) Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour Feed Capacity 20kg 40kg 60kg 100kg 200 kg Control Mode PLC PLC PLC PLC PLC Combustion Chamber 100L 210L 330L 560L 1200L Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm […]
This model is small-scale waste incineration equipment for small waste output. Construction is dual/double combustion chamber with 02 units oil/gas burner. Waste feed chamber is around 900Liters (0.9m3, YD-50). Primary & Secondary combustion chambers and included mix-combustion chamber. Waste load on the bottom of chamber. Incinerator panel control suit for local operation. Model YD-50 with […]
Basic Info. Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:Clover Medical Product Description Key Attributes: * All versions with Dual combustion chamber. * Stainless Steel chimney/stack, long life. *based on sequence * High temperature, long life of incinerator. * Free or minimal installation on site. * High burn rate, from 10kgs to […]
HICLOVER Fighting COVID-19 CE ISO
