Basic Info. Model NO.:30 kg per hour Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:clover Product Description Items/Model TS30(PLC) Burn Rate 30 kg/hour Feed Capacity 60kg Control Mode PLC Combustion Chamber 330L Internal Dimensions 75x75x60cm Secondary Chamber 180L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 0.5Kw Oil Consumption (kg/hour) […]
The chamber should be insulated and refractory lined with high temperature and heat resistant material. Should be fitted with burners that use low sulphur fuel.Auxiliary air supply should be controlled.Ensure residence time is not less than two seconds.Ensure that the gas temperature as measured against the inside wall in the secondary chamber and not in the flame zone is not less than 1100 degrees centigrade.Ensure the emitted oxygen content of the emitted gases is not less than 11%Ensure both primary and secondary combustion temperatures are maintained until all waste is completely combusted.Heat input from the afterburner should be controlled automatically by the programmable digital control system, such that in the event of temperatures in excess of 950°C – 1,050°C being transferred from the primary chamber the afterburner will switch off to conserve fuel.Provide 2 burners- 1 diesel fired packaged primary burner and a single secondary afterburner.The burners should be temperature controlled to conserve fuel and attain optimum combustion.Factory waste disposal packed unit dim 1850mm*2000mm*2500mm incinerator capable of burning a guaranteed 50 kg/hr of office waste efficiently without the emission of fly ash, dour and smoke-Refuse ignition burner– After burner-Air fans-Refractory lined steel shell with integrated ducts Primary combustion chamber with a capacity of 1 cubic meters.Stainless steel chimney > 6 meters.Burn rate (rate of waste incineration) -at least 50 kg per hourShould have a full width counterbalance loading door allowing easy access to the main chamber for loading and removing ash.1 off diesel-fired ignition burner C temperature controlled1 off combustion air supply fan and distribution systemHigh capacity secondary combustion chamber 2.0 @ >1050oC1 off diesel-fired afterburner C temperature controlled
Product Description Nanjing Clover Medical Technology Co., Ltd.. Items/Model TS50(PLC) Picture Burn Rate 50 kg/hour Feed Capacity 100kg Control Mode PLC Combustion Chamber 560L Internal Dimensions 100x80x70cm Secondary Chamber 280L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 0.7Kw Oil Consumption (kg/hour) 12.1–24 Gas Consumption (m3/hour) 9.9–26.1 Temperature Monitor Yes Temperature Protection […]
Item Specification Model YD-30C Main Product List Primary Combustion Chamber(Main body stainless steel) Secondary Combustion Chamber(Main body stainless steel) Mix-Combustion Chamber Wet Scrubber( Washing Tower)(Main body stainless steel) Incinerator Control Case Chimney:5.0Meters *(upgrade to Stainless Steel, free cost) Italy gas burner: 02 sets Oil Tank (if oil fuel): 100Liters Automatic PLC controller incinerator plant with […]
Basic Info. Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:clover Product Description Item Specification Model YD-30 YD-50 YD-100 YD-150 YD-300 YD-500 Burning Rate 30kgs/Hour 50kgs/Hour 100kgs/Hour 150kgs/Hour 300kgs/Hour 500kgs/Hour Main Product List Double Combustion Chamber Mix-Combustion Chamber Smoke Filter Chamber Control Case Stack Italy oil/gas burner: 02 units Oil Tank (if […]
Incinerator, incineration equipment to burn material you want to burn. most of time, Incinerator for waste burning, including solid waste, liquid waste and gas waste. the Incinerator fuel including oil, gas, coal, wood, etc. the fuel function for start burn, keep waste burn or only keep burn itself to get high temperature. Incinerator request 1/2/3/more […]
WWW.HICLOVER.COM｜Waste Incinerators ｜Auto Roll Air Filters Nanjing Clover Medical Technology Co.,Ltd. Tel: +86-25-8461 0201 Mobile: +86-13813931455(whatsapp/wechat)Website: www.hiclover.com Email: sales@hiclover.comEmail: hicloversales@gmail.com Items/Model TS75(PLC) Principle Medical Waste Incineration Burn Rate Average 75 kg/hour Feed Capacity Average 120kg Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 640L Internal Dimensions 100x80x80cm Secondary Chamber 280L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 0.7Kw Oil Consumption (kg/hour) Average […]
Clover Incinerator update A model incinerator for pet cremation and animal incineration. New design accept independent movable platform in-out incinerator combustion chamber. This new design is valid for model A900 and bigger model. Items/Model A900 A1200 A1500 A2400 A4000 A5500 Burning Rate *animal 30 kgs/Hr. 60 kgs/Hr. 90 kgs/Hr. 150 kgs/Hr. 200 kgs/Hr. 400 kgs/Hr. […]
She confirmed the company managed to use money from its reserves to help with the purchase. However, CPASA is still looking for donations to help make up the cost and to help with the maintenance of equipment. The incinerator is located in the Princeton Police Department. A weapon and a shelter still has to be […]
we create small scale waste incinerators, the potential from 10kgs,20kgs,30kgs,50kgs,100kgs per hour. Key Features: * High speed, from 10kgs to 600kgs per hour, up to 10ton per day. * High fever, long life of incinerator. * Free or minimal installation onsite. * One year guarantee on incinerator and parts in stock.
This model is small-scale animal cremation equipment for small pets and animals. Construction is dual/double combustion chamber with 02 units oil/gas burner, batch load incineration equipment. Animal feed chamber is 360Liters (Model: A360). Primary & Secondary combustion chambers and included mix-combustion chamber, smoke filter chamber with firebrick and Refractory Concrete chamber(as quotation detail). Batch load […]
MOGADISHU SOMALIA WASTE INCINERATOR TREATMENT – TS300( PLC) Incinerator Items/Model HICLOVER TS300(PLC) Burn Rate (Average) 300 kg/hour Feed Capacity(Average) 400kg/feeding Control Mode PLC Automatic Primary Combustion Chamber 2000Liters(2.0m3) Internal Dimensions 1700x1200x1000mm Secondary Chamber 1000Liters(1.0m3) Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 2.5Kw Burner Type Italy Brand Oil Consumption (kg/hour) 28 N.Gas Consumption […]
Incinerator Model A1500, Overview This model is big-scale animal cremation equipment for big animals. Construction is dual/double combustion chamber with 03 units oil/gas burner, batch load incineration equipment. Animal feed chamber is 1500Liters (Model: A1500). Primary & Secondary combustion chambers and included mix-combustion chamber, smoke filter chamber with firebrick and Refractory Concrete chamber. Batch load […]
Basic Info. Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:CLOVER Origin:Nanjing Production Capacity:1000 Sets Per Year Product Description Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC) Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour Feed Capacity 20kg 40kg 60kg 100kg 200 kg Control Mode PLC PLC PLC PLC PLC Combustion […]
Waste Disposal Methods in Hospital • An 8 hour daily operating cycle of ash removal, pre-heat and burn with continuous loading if required. The automated burn completion and cool down cycle will take place overnight. • The incinerators shall be capable of using diesel fuel as a supplemental fuel while the associated management equipment shall […]
Basic Info. Model NO.:tempreture of the stoker moving grate incinerator Export Markets:Global Product Description Key Features: * All versions with Dual combustion chamber. * Stainless Steel chimney/stack, long lifetime. *according to order * High fever, long lifetime of incinerator. * Free or minimal installation onsite. * High speed, from 10kgs to 500kgs per hourto 6ton […]
Basic Info. Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:clover Origin:Nanjing Product Description Nanjing Clover Medical Technology Co., Ltd..
Item Specification Model A900 Internal Dimensions 120 x 90 x 85 CM Suit for Animal Cat – yes Dog – yes Pig – small Cow – no Main Product List Primary Combustion Chamber Secondary Combustion Chamber Mix-Combustion Chamber Smoke Filter Chamber Incinerator Control Case Chimney:5.0Meters *(upgrade to Stainless Steel, free cost) Italy oil/gas burner: 02 […]
Basic Info. Export Markets:Global Additional Info. Trademark:clover Product Description Items Specification Model TS10(PLC) / TS20(PLC) / TS30(PLC) / TS50(PLC) / TS100(PLC) Main Product List Double Combustion Chamber Smoke Filter Chamber PLC Mode Control Case Stainless Steel Chimney Italy oil/gas burner: 02 units Oil Tank (if oil fuel)
HICLOVER Fighting COVID-19 CE ISO
