Basic Info. Model NO.:heat of combustion of pig incineration of carca Export Markets:Global Product Description Nanjing Clover Medical Technology Co., Ltd. Nanjing Clover Medical Technology Co., Ltd.. Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC) Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour Feed Capacity 20kg 40kg 60kg 100kg 200 kg Control Mode […]
Product Description Nanjing Clover Medical Technology Co., Ltd.. Items/Model YD-10C YD-20C YD-30C YD-50C Burning Rate (kgs/Hour) 10 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 50 kgs/Hr. Feed Capacity (kgs) 40 kgs 40 kgs 50 kgs 80 kgs Equipment Weight 1200 kgs 1200 kgs 1800 kgs 2200 kgs Primary Chamber (Liters) 200 200 250 400 Secondary Chamber (Liters) […]
Incinerator Model TS250 PLC, Overview This model is small-scale waste incineration equipment for small waste output. Construction is dual/double combustion chamber with 02 units oil burner, batch load incineration equipment. Waste feed chamber is 1800Liters (1.8m3, TS250 PLC). Primary & Secondary combustion chambers and smoke filter chamber. Batch load on the bottom of chamber. Incinerator […]
The proposed incinerators shall be able to be completely packed into a series of 20ft export standard sea containers. Incinerators must be able to support different power sources (PV solar system , diesel Electric generator , local or compound mini-scale grid) All electrical connections attached with the incinerator and other machinery should be provided with […]
平面口罩机参数： Semi-Automatic Mask Machine l Power supply: 3.3KW mono phase l Mask Size: 175mm*80-100mm (two or three layers) l Nonwoven (GMS): 10-50g l Capacity: 120 to 150pcs/min l Dimension(L*W*H):3800mm*500mm*1400mm l Net Weight: about 1000kg 焊接机参数： Welding Machine l Capacity: 5 to 10pcs/min l Power supply: 8.5KW mono phase l Compressed Air connection: 0.5 to 0.7Mpa l Dimension(L*W*H): 900mm*650mm*1380mm l Net weight: approx. 50kg KN95口罩机参数： N95 Mask Machine l Capacity: […]
We finish this project in year 2010 to 2011 and delivery to Hochiminh port, Vietnam with 1×40’feet open top full container.
Basic Info. Model NO.:30 kg per hour Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:clover Product Description Items/Model TS30(PLC) Burn Rate 30 kg/hour Feed Capacity 60kg Control Mode PLC Combustion Chamber 330L Internal Dimensions 75x75x60cm Secondary Chamber 180L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 0.5Kw Oil Consumption (kg/hour) […]
The chamber should be insulated and refractory lined with high temperature and heat resistant material. Should be fitted with burners that use low sulphur fuel.Auxiliary air supply should be controlled.Ensure residence time is not less than two seconds.Ensure that the gas temperature as measured against the inside wall in the secondary chamber and not in the flame zone is not less than 1100 degrees centigrade.Ensure the emitted oxygen content of the emitted gases is not less than 11%Ensure both primary and secondary combustion temperatures are maintained until all waste is completely combusted.Heat input from the afterburner should be controlled automatically by the programmable digital control system, such that in the event of temperatures in excess of 950°C – 1,050°C being transferred from the primary chamber the afterburner will switch off to conserve fuel.Provide 2 burners- 1 diesel fired packaged primary burner and a single secondary afterburner.The burners should be temperature controlled to conserve fuel and attain optimum combustion.Factory waste disposal packed unit dim 1850mm*2000mm*2500mm incinerator capable of burning a guaranteed 50 kg/hr of office waste efficiently without the emission of fly ash, dour and smoke-Refuse ignition burner– After burner-Air fans-Refractory lined steel shell with integrated ducts Primary combustion chamber with a capacity of 1 cubic meters.Stainless steel chimney > 6 meters.Burn rate (rate of waste incineration) -at least 50 kg per hourShould have a full width counterbalance loading door allowing easy access to the main chamber for loading and removing ash.1 off diesel-fired ignition burner C temperature controlled1 off combustion air supply fan and distribution systemHigh capacity secondary combustion chamber 2.0 @ >1050oC1 off diesel-fired afterburner C temperature controlled
HICLOVER Fighting COVID-19 CE ISO
