CLOVER Incinerators
Medical Incinerator, Animal Cremation, Waste Incinerator

Home YZ Incinerator YD Incinerator SYC Incinerator CONVO Incinerator Containerized Incinerators

Burners

Contact Us

 

CONVO系列焚烧炉:医用废弃物、动物尸体及其他固体垃圾

使用瑞典百通燃油/气燃烧器,平均处理能力50/100/150/200/300公斤每小时。主体结构为一次燃烧室、二次燃烧室,可根据客人需要配置喷淋系统净化系统一套或者二套及热交换处理系统一套。燃烧器数量为2台,可根据需要增加到3台。内部使用高强度耐火砖、耐火水泥及耐火陶瓷纤维板。

CONVO Series Incinerator: Medical Incinerator, Animal Cremation, Waste Incinerator

Optional Sprinkler system, Heat Exchange System(W2E System)
Capacity: 50/100/150/200/300kgs per hour
This incinerator is mainly used for industrial waste, paint residue, garbage, medical waste and port waste disposal. Installation of a heat exchange system can handle the burning of waste heat into hot water or hot air to effective use, do both. The furnace using ceramic fiber as the main light insulation, the heat recovery effect more fully.
 


1. Ceramic fiber furnace insulation structure, with less heat absorption, heating speed, effective insulation, energy-saving advantages; the parts are made of high quality raw materials, improve service life.
2. Incinerator inside the maze design, can effectively remove dust, no external cyclone dust, compact and low cost.
3. The principle of using 3T design, high efficiency, energy saving, environmental protection; normal burn, the basic need for combustion of fuel and energy saving.
4. Tuyere arrangement of science, the formation of strong vortex, burning more fully; extend the flue gas residence time, to ensure the flue gas treatment effect.
5. May need in the secondary combustion chamber configuration after the heat exchange system, the high temperature flue gas from 800C ° ~ 1200 C ° down to 200 C ° or so, heat is transferred to the middle of life, industrial use, thereby saving energy.
6. Can be configured according to different circumstances subsequent washing device in order to meet the national emission standards.

Incinerator Principle of work:
The reject invests in a time combustion chamber stove by the artificial batch intermittence type, carries on the combustion by a combustion machine ignition, simultaneously, aids combust the air blower to catch a chill from the different angle to the stove, guarantee waste thorough combustion; In a combustion chamber stove produces haze and dust after labyrinth type curtain wall when the massive dusts are asked the price with no intention of buying, and enters two combustion chamber to carry on two time high temperature 1100℃ above thermal decomposition not to burn the cinders except the haze in the free carbon. The high temperature haze which comes out from two combustion chamber achieves without the unusual smell, does not have the odor, and the dust quantity is also low.

Incinerator disposition and major technique parameter
1、the holding furnace body (300mm high quality imported ceramic fiber cotton insulation layer) set, with the main combustion chamber of a device, a Vice-chamber devices, maze dust removal system, the ash system.
2、combustion machine 2 (Sweden Belden)
3、stainless steel exhaust pipe set.
4、an electronic control system.
5、the use of fuel: diesel or gas.
6、a burning temperature: 300 ℃ -800 ℃.
7、 the secondary combustion temperature: 850 ℃ -1100 ℃.
8,、he gas flow lag time: ≥ 2 seconds.
9、the burning hot burning rates of residue: ≤ 5%

The Incinerator selects the disposition
1、Sprinkler system, including spray towers, water pumps, and pipes, fans, etc.;
2、Heat exchange system, including heat exchangers, pumps, valves, thermocouples, and pipelines.
Spec./Models CONVO-50 CONVO-100 CONVO-150 CONVO-200 CONVO-300
Outside Size(mm) 2045x1200x1750 2245x1500x1750 2445x1700x1850 2545x1900x2250  
Chamber Size(mm) 800x600x1000 1000x900x1000 1250x1100x1100 1300x1300x1500  
Capacity(Kgs/Hour) 30~50 80~100 100~150 150~200  
Oil Consumption(Kgs/Hour) 6~8 6~8 7~9 8~10  
Blower Power 1.5kw 2.2kw 3kw 3kw  

incinerator,medical waste incinerator,medical incinerator,hospital incinerator,waste incinerator,pet cremation,mobile incinerator,biological incinerator,solid incinerator,small incinerator,Установка для сжигания отходов,garbage Incinerator,china incinerator,animal Incinerator,portable Incinerator


 

Product Range:
we are china incinerator manufacturer, produce incinerator, including medical incinerator, hospital incinerator, pet cremation and crematory, rubbish incinerator, trash incinerator, Incinerator, pet Cremation. Our Incinerator made in China, medical Incinerator manufacturer, hospital incinerator, medical Incinerator and animal incinerator. And also biological incinerator, portable incinerator, mobile incinerator.
china hospital incinerator manufacturer and supplier
china incinerator catalog
Please contact with us if any questions.

*Home * YZ Incinerator * YD Incinerator * SYC Incinerator * CONVO Incinerator * Containerized Incinerator * Burner * Contact Us
*
10kgs per hour Incinerator * 20kgs per hour Incinerator * 30kgs per hour Incinerator * 50kgs per hour Incinerator *
*
100kgs per hour Incinerators * 150kgs per hour Incinerator * 300kgs per hour Incinerator * 500kgs per hour Incinerator *
Nanjing Clover Medical Technology Co.,Ltd.
Rm.411, 07 Building, East Wanda Plaza, 58# Yunjin Road, Nanjing, P.R.China Post Code: 210019
Tel: +86-25-84610201 Fax: +86-25-84610406
Website: www.clover-incinera
tor.com Email: cloverincinerator@Gmail.com
Copyright 2010 Clover Medical Limited All Rights Resered.