Basic Info. Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:clover Product Description Incinerator is a incineration gear, direct fire squander by gasoline fuel or oi fuel. As different circumscription, incinerator could be termed many words as below: Treatment capacity: Small scale incinerator, large scale incinerator and incineration pant. Waste material: Municipal waste […]
Model WS-100 Picture Burning Rate Average 100 kgs/hour Feed Capacity Average 200 kgs Primary Combustion Chamber 1200 Liters Secondary Combustion Chamber 500 Liters Mix Combustion Chamber Yes Smoke Filter Chamber Wet Scrubber System Feed Mode Manual Voltage 220V Power 2Kw Fuel Type Diesel Oil/ Natural Gas/LPG Burner Italy Original Oil Consumption (Diesel Oil) 14--28 kg/hour […]
Basic Info. Model NO.:clover medical limited china Export Markets:Global Product Description Items/Model YD-10C YD-20C YD-30C YD-50C Burning Rate (kgs/Hour) 10 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 50 kgs/Hr. Feed Capacity (kgs) 40 kgs 40 kgs 50 kgs 80 kgs Equipment Weight 1200 kgs 1200 kgs 1800 kgs 2200 kgs Picture Primary Chamber (Liters) 200 200 […]
HICLOVER – Containerized Mobile Incinerator Medical Waste Incinerator Model CA50 Model CA50 Picture Waste Treatment Medical Waste Incineration Treatment Feed Capacity Average 100 kgs per feeding Burning Rate Average 50 kgs per hour Burning Time per Feed Average 2 hour Control Mode PLC(Programmable Logic Controller Incinerator) Voltage 220V Power 1.0 Kw Fuel Diesel oil Burner Italy […]
Basic Info. for Animal:All Dosage Form:Incineration Type:Cremation Function:Cremation Export Markets:Global Additional Info. Trademark:nanjing clover Origin:Nanjing Clover Product Description Research and Markets: Waste: A Handbook for Management The breadth of information included in this volume will ensure it is the most extensive coverage of waste available on the market. It focuses on all of the primary […]
Three sets incinerator with 1oo kgs per hour capacity dispatch to Africa customer.
Basic Info. Pullution Sources:Solid Waste Processing Processing Methods:Combustion Export Markets:Global Additional Info. Trademark:clover Product Description Item Specification Model YD-30 YD-50 YD-100 YD-150 YD-300 YD-500 Burning Rate 30kgs/Hour 50kgs/Hour 100kgs/Hour 150kgs/Hour 300kgs/Hour 500kgs/Hour Main Product List Double Combustion Chamber Mix-Combustion Chamber Smoke Filter Chamber Control Case Stack Italy oil/gas burner: 02 units Oil Tank (if […]
Product Description Key Features: * All models with Dual combustion room. *based on order * High temperature, long lifetime of incinerator. * Free or minimum installation onsite. * High speed, from 10kgs to 500kgs per hourto 6ton daily. * PLC Control Plane. *based on order * New Design for pet animal cremation enterprise. * One […]
N95 Face Mask Machine Production Line on Sale Now! $250,000USD per set N95 Face Mask Machine Production Line on Sale Now! $250,000USD per set l Dimension(L*W*H): 1037*855*1780 l Power Supply 15.3kw mono phase l Net Weight: approx.: 1500kg HICLOVER – Medical Environmental WWW.HICLOVER.COM Waste Incinerators Medical Waste Incinerator Pet Animal Cremation Solid Waste Incinerator Tel: +86-25-8461 0201 Mobile: +86-13813931455(whatsapp/wechat)Website: www.hiclover.com Email: sales@hiclover.comEmail: hicloversales@gmail.com Nanjing Clover Medical Technology Co.,Ltd. […]
Nominal burning rate shall be 100 -140 kg/hr with 8 hour daily operating cycle of ash removal, pre-heat and burn with continuous loading.Primary power source shall be electricity but capable of using diesel fuel as a supplemental fuel.The waste incinerators shall be designed for 3 Phase, 380-400 V, 50 Hz electricity supply.Should have dual combustion chambers with gas temperature achieve 1000 C for retention time at least 2 second,Have a thermal efficiency of not less than 85%.All metal surfaces (except combustion chamber internal fittings) shall be either galvanized, enameled, painted or otherwise treated against atmospheric and process induced corrosion.The incinerator combustion chambers should be designed for easy maintenance of all internal parts including the refractory and insulation. Materials used in the individual parts of the incinerator shall be heat resistance and also be protected against oxidation, corrosion, etc.Primary and secondary chambers preferably have rounded inside corners to avoid the formation of dead zone or cold pockets.Generate residual incinerator ash conforming to <10% by volume and <25% by weight of the waste incinerated.Achieve a Total Organic Carbon (TOC) content in the slag and bottom ashes of less than 3%. Combustion Efficiency (CE) at least 99%.
HICLOVER Fighting COVID-19 CE ISO
