china incinerator manufacturer

Items/Model

TS50(PLC)

Principle

Animal Cremation Treatment

Burn Rate

Average 25 kg/hour

Feed Capacity

Average 50kg

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

560L

Internal Dimensions

100x80x70cm

Secondary Chamber

280L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V

Power

0.7Kw

Oil Consumption (kg/hour)

12.1–24

Gas Consumption (m3/hour)

9.9–26.1

Temperature Monitor

Digital Display

Temperature Protection

Yes

Oil Tank

100L

Feed Door

70x55cm

Chimney

5Meter

Chimney Type

Stainless Steel

1st. Chamber Temperature

800-1000

2nd. Chamber Temperature

1000-1200

Residency Time

2.0 Sec.

Gross Weight

4500kg

External Dimensions

230x130x155cm

b. be very robust, sturdy and capable of installation in remote locations subject to severe conditions.
d. generate residual incinerator ash conforming to <10% by volume and <25% by weight of the waste incinerated.
e. achieve a Total Organic Carbon (TOC) content in the slag and bottom ashes of less than 3%.
g. include clearly readable system operation panels.
Primary & Secondary Chamber Thermocouple
Burner Ionization Probes
Burner Ionization Leads
Burner Flame Control Box
Burner ignition transformer
Complete spare burner
Thermal Resistor
h. include an operator’s manual (in English and French and Spanish).
i. require minimal preprocessing i.e. there shall be no/very limited need for prior sorting, crushing or shredding.
j. be capable of handling mixed solid waste streams and incinerable hazardous wastes as indicated.
k. can accommodate large variations in waste composition and calorific value.
l. allow for batch loading
Apart from the manual loading of waste, the incinerator should be automatic and easy to use or Plug and play modal
The incinerators shall be able to be operated with the following three forms of fuel and gas: Diesel, LPG and N-Gas.
Maximum load capacity of a minimum of 100kg
Burn Rate of anywhere between 50 – 80 kg/hr
Thermal Capacity 190 kwg/hr or less
It should use a Power Supply of 50/60Hz or 210/230v
External Length of anywhere between 1800 to 1900 (mm) 
External Width of anywhere between 1100 to 1200 (mm)
External Height of anywhere between 1900 to 2000 (mm)

  • RT @XHNews: Timeline shows critical moments of China-U.S. #COVID19 interaction To say China did not cooperate is a total LIE https://t.co/v…
  • RT @Jackesoneric: 兵马俑VS自由女神!新华社视频在国外火了 https://t.co/7O8LmDBVvK
  • ES Fiber Production Line and 400mm Melt blown Production Line and 1600mm Melt blown Production Line and and ... -… https://t.co/7G9USyMfxT
  • RT @DrTedros: From Seychelles 🇸🇨 to Djibouti 🇩🇯, Somalia 🇸🇴 to Madagascar 🇲🇬; face shields, gloves, goggles, gowns, masks, medical aprons a…
  • RT @PeterASinger: What has @WHO done on #COVID19? — shipped >2 m pieces of PPE — supplied 1.5 m diagnostics — provided 1.2 m courses to hea…